MI 2140 MI 2140 Omega &BetaPAT Instrument description
43
4.8. Storing autotest results
After completing the appliance test the SAVE RESULT display will appear.
Fig. 4.83 Save result menu
By using the keyboard the user can enter all relevant details, such as number and name
of appliance, building, room, repair code and desired comments (the user is predefined
in the EDIT USERS menu – see chapter 5.3). To select the required line, use the UP
and DOWN keys.
Pressing the F2 (UNDO) key will return the previous content in the selected data line.
By pressing the F5 (LIST) key the user can choose a name from predefined name lists.
APPLIANCE NUMBER
Appliance number: any alphanumeric character can be used in this field. Appliance
number can be read directly with a Bar Code Reader. This data is obligatory for storing
any appliance test.
BUILDING
Any alphanumeric character can be used in this field.
It is possible to choose building data from a pre-set list of buildings – SELECT
BUILDING menu. Up to 60 predefined names can be pre-set in this menu.
ROOM
Any alphanumeric character can be used in this field.
It is possible to choose data from a pre-set list of rooms – SELECT ROOM menu. Up to
60 predefined names can be pre-set in this menu.
USER
The user is predefined in EDIT USERS menu – (see chapter 5.3).
APPLIANCE NAME
Any alphanumeric character can be set in this line.
It is possible to choose the appliance data from a pre-set list of names – SELECT
APPLIANCE menu. Up to 60 predefined names can be prepared in this menu.
RETEST PERIOD
In retest period a predefined period for retesting of appliances can be entered.
REPAIRING CODE
Repair code is a short, predefined code used in connection with some PC SW
packages.
To Next Page
Loading...
Need help?
General
