MI 2140 MI 2140 Omega &BetaPAT Instrument description
44
COMMENT
Any desired comments can be added in this field.
Pressing the F1 (SAVE) will save the measurements into memory. After saving the
results the instrument returns to the PERFORM APPLIANCE TEST display.
Pressing the F3 (SEND): the instrument goes into SEND RESULTS menu. From this
menu, the appliance test results can be printed out or downloaded to PC. Refer to
chapter Recall/Delete/Send memory for more information.
Pressing the F4 (VIEW) key will display all results and data in the same format, as they
will be stored.
Pressing the ESC key will return to the PERFORM APPLIANCE TEST display without
saving the results.
How to choose a name from the pre-set building/room/appliance list:
An example of how to use pre-set appliance names is shown below. The procedure is
identical for both buildings and rooms.
Press the F5 (LIST) key and select the name. Press the F1 (EDIT) key to change the
set name. The new name is confirmed with the SAVE or cancelled with the UNDO key.
Fig. 4.84 Predefined appliance names
Fig. 4.85 Custom appliance name
To Next Page
Loading...
Need help?
General
