Metrohm 930 Compact IC Flex Manual - Short Instructions

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
930 Compact IC Flex ChS/PP/Deg (2.930.1360)
￭￭￭￭￭￭￭￭
17
4.5 Connecting the eluent bottle
The eluent is aspirated out of the eluent bottle via the eluent aspiration
tubing . The eluent aspiration tubing is installed on the entry to the eluent
degasser.
Accessories For this step, you need the following accessories:
These parts are part of the accessory kit Vario/Flex ONE (6.5000.010).
￭ Eluent bottle (6.1608.070)
￭ The eluent bottle cap GL 45 accessory set (6.1602.160)
This accessory set contains the bottle cap, an M6 tubing nipple, an M8
tubing nipple, two O-rings and an M6 and M8 threaded stopper.
￭ The tubing adapter for aspiration filter accessory set (6.2744.210)
This accessory set contains a filter holder, a clamping screw and tubing
weighting.
￭ An aspiration filter (6.2821.090)
￭ The adsorber tube (6.1609.000)
￭ The SGJ clip (6.2023.020)

Metrohm 930 Compact IC Flex Specifications

General

Brand	Metrohm
Model	930 Compact IC Flex
Category	Laboratory Equipment
Language	English