MFB Tanzbar 2 - Sample Key Operation; Flam Effects

!
H%!
Sample Key
If you have selected one of the sample-based
instruments in Record-Mode (LEDs of selected steps
flash), the preset sample can be changed as
followed. In order to change the sample of
previously set steps, these have to be set in
Edit-Mode(p.12).
• Hold the Sample-key and additionally press
one of the 16 white keys. Each key features a
different sample. Try the sounds and select
the desired sample.
• The Sample key must always be pressed when a
changing of samples!
Flams
As with Accent, for using Flams, Record-Mode needs
to be turned on for the respective instrument.
Flam is set as follows:
• Hold Flam key
• Adjust the intensity of the flam by
pressing one of the 16 white keys.
8,![0,.03?!(2*BB12?[4E1!/)1!+0Q-31+!49!/)1!5.221,/3A!+1315/1E!*,+/2.Q1,/!J+11!E*+-30AP!
50,!=1!-213*+/1,1E!G)*31!)43E*,B!/)1!Sample!@1A!!0,E!-21++*,B!4,1!49!/)1!H&!G)*/1!@1A+7!
!
U310+1!R4/1Z!]30Q!!4,3A!09915/+!/)1!+/1-+!*,!1E*/!Q4E1J:;<+!930+)!21EP7!!!