MFB Tanzbar 2 - Shift Functions; Pattern Manipulation

!
"I!
Shift-Functions
1. Shuffle
After selecting the shuffle-menu as
described above, the shuffle intensity can
be increased by pressing steps 2 to 16. No
shuffle is set by pressing step 1.
The shuffle equally applies to all(!)tracks,
both in Manual- as well as in Step-Mode.
2. Last Step
Last Step sets the number of steps per bar:
• for all tracks (in Manual-Trigger-Mode)
• individually per track (in Record-Mode)
3. Scale
Rhythmic scaling can be set with this
function.
You can choose:
• press key 1 for demisemiquavers.
• press key 2 for 16th triplets,
• press key 3 for 16th
• press key 4 for 8th triplets
• press key 5 for 8th
4. Copy Bar
The display shows which one of the four
bars to copy.You either press A,B,C
or D. Also, the following should be noted:
In Manual-Trigger-Mode all instruments
are copied, while in Record Mode only the
selected instrument is copied.
O33!Shift*functions*021!Q02@1E!=3.1!4,!/)1!G)*/1!*,+/2.Q1,/!@1A+!0,E!50,!4,3A!=1!
0551++1E!>*0!S)*9/!J03+4!Q02@1E!=3.1P!7!!!O+!+44,!0+!A4.^>1!5)4+1,!/)1!E1+*21E!9.,5/*4,C!
*/!G*33!=1!+)4G,!*,!/)1!<*+-30A7!!()*+!03G0A+!G42@+!/)1!+0Q1!G0A!_!Shif t+Shift*
function!J@1A!H?H&P!0,E!!54,9*2Q!G*/)!INSTRUMENT/SELJS1315/P!@1A7!