MFB Tanzbar 2 - Sample Transfer; Sample Loading Process

!
"$!
Sample Transfer
All samplebased instruments can replaced by you
own samples. To transfer your samples, please
download on the MFB-Homepage the the Sample-
Transfer-Tool which comes with the newest OS,
as well the Update-Tool.
To transfer samples from your Computer to the
Tanzbär 2 please follow these Instructions:
• Start the Sampe-Tool on your Computer or
Mac.
• Now connect either the MIDI-Output of your
Interface with the MIDI-Input of the
Tanzbär 2 or use the USB-Hub on both sides.
• If you have connected your Tanzbär 2 using
the MIDI-In/Output please select your MIDI-
Interface in the Sample-Tool.If you have
connected it using the USB Hubs, Tanzbär 2
will show up automatically as an option to
select.
• „Sample Number“ indicates in which slot you
want to replace the Sample you have
choosen.
• Drag the sample with your mouse and drop it
in the field saying „Drop Sample her!“.
• The sample file will show up below the
„Drop Sample here!“ field.
• Start the transfer by clicking on „Start
Transmission“.
• The display will show the on going Transfer
of the Sample
O((;R(8LRZ!U310+1!=1!0G021!/)0/!/)1!Q0Y*Q.Q!31,B/)!49!0!S0Q-31!50,!=1!\!
+154,E+7O21!033!S0Q-31+34/+!9.33!,4/)*,B!G*33!=1!*,E*50/*,BC,1*/)12!/)1!<*+-30A!42!
+4Q1/)*,B!13+17!`1!0G021!/)0/!/)121!021!03210EA!+0>1E!S0Q-31+!*,+*E1!/)0/!/0@1!
S/420B1+-0517!!