Synthesizer-Programming
To program the internal Bass Synth, Record mode
needs to be activated (p. 9).
The keys now work as a keyboard. After setting
a step (note), the next step (note) is always
awaited. Notation is carried just like on a
regular keyboard.
Step 1 (Rest) sets pauses.
Pressing Shift and Step 1 (Hold) holds the
note.
Set Glide by pressing the respective button in
combination with the next note (Step).
The octave range can be adjusted by using the
DATA4 key. It is only meant to program a new
sequence. You can choose between the values -,
0 and +.
Programing MIDI-tracks does work the same way.
With the exception of the Glide function being
disabled.
Roll: With this function, entered notes are
being repeated(Note-Repeat).
U310+1!,4/1Z!S0>1E!+1V.1,51+!50,!,4/!=1!1E*/1EZ!
O+!+44,!0+!0!,1G!+/1-!J,4/1P!*+!+1/!/)1!-21>*4.+!+1V.1,51!G*33!=1!E131/1E7!!
To Next Page
Loading...
