Need help?Do you have a question about the MFB Tanzbar 2 and is the answer not in the manual?
Legal notice regarding the accuracy and liability for manual content.
General safety guidelines for handling electric products and the device.
Guidelines for optimal device placement, avoiding environmental hazards like humidity and heat.
Instructions for safe and correct electrical connection and handling of the power supply.
General guidance for safe and proper use of the device during operation.
Precautions and procedures for cleaning and servicing the device.
Specifies the authorized functions and applications for the device.
Information on the environmentally responsible disposal of the product.
A brief explanation of basic functions for quick pattern programming.
How to set tempo and start the internal sequencer.
Method for selecting and loading patterns using the interface.
Guidance on activating real-time note recording for pattern creation.
Detailed explanation of the device's physical controls, buttons, and display elements.
A key to understand the labeling and functions of various controls and their shift-functions.
Description of the preset factory operation mode for programming.
Explanation of step-based parameter editing and locking.
How to trigger instruments for prelistening and recording in Manual mode.
How to set and edit triggers for desired steps in Record mode.
Procedures for selecting instruments when the sequencer is stopped or running.
How to load and select patterns from memory using the interface.
Guide to programming consecutive patterns into chains for playback.
How to record parameter movements of selected instruments.
How to adjust accent levels for selected steps and patterns.
Instructions for changing samples for sample-based instruments.
How to set and adjust flam effects for instrument steps.
How to enable and configure Low Frequency Oscillators for modulation.
How to mute individual LFO tracks for specific instruments.
How to mute individual instruments within a pattern.
How to set and adjust the master tempo of the device.
Information on starting sequences and managing different bar areas.
Using the keys as a keyboard for inputting notes and creating sequences.
How to apply glide and roll effects to notes and sequences.
Adjusting shuffle, step count, scale, and copying/pasting pattern bars.
Procedures for pattern dumping, saving, clearing, and switching modes.
Real-time recording, MIDI learn, clock setup, and note transmission.
Configuring MIDI CC, MIDI Thru, and miscellaneous settings like LCD contrast.
Step-by-step instructions for transferring custom samples to the device.
Guide on how to update the device's operating system via MIDI.
To Next Page
General
