14. MIDI CC:
Transmission and reception of MIDI
controller values can be turned on and off
using the DATA3 and DATA4 keys.
The encoders DATA1 and DATA2 can not be
controlled via MIDI CC.
15. MIDI Thru:
As soon as this function is activated,
no internal MIDI functions will be
sent to the output. Neither MIDI-triggers,
MIDI controller-data nor MIDI-clock.
Data being received on the MIDI input,will
be passed on to the output. If you only
want to pass on incoming MIDI clock
data, see MIDI Clock Setup.
16. MISC Submenu
Key 1: Set LCD-contrast by Encoder
DATA1 and store by pressing Select.
Key 2: MIDI-CC-mumbers for MIDI-track 1
can be set using the DATA1 and
DATA2 encoders.To select a MIDI
channel use DATA3 key.
Key 3: Setting the MIDI-CC-numbers, as
well as selecting the MIDI-channel
follows the same procedure as for
MIDI track 1.
To Next Page
Loading...
