a. After starting:
• Verify that instrument cluster
indicators and speedometer are
operating normally.
• Ensure the vehicle maintains a
straight path when brakes are
applied.
• Listen for any unusual noises.
b. Preparations before driving
• Check surroundings before
entering the vehicle.
• Adjust seat position, backrest
angle, seat cushion height,
headrest height, and steering
wheel angle and height.
• Adjust rearview mirror and side
mirrors.
• Ensure all doors are closed
securely.
• Fasten seat belts.
c. Pedals
To ensure that the pedal travel is
unhampered, the floor mat in the
pedal area shall not be excessively
thick, and no article shall be placed in
the pedal area.
d. Gear shift controls:
• Gear positions are marked on
the gearshift lever.
• Press the "P" button to stop the
vehicle; use this position when
starting or stopping the motor.
• Press the brake pedal and the
unlock button to shift gears.
e. Creeping*
Crawl mode allows the car to move
slowly in D or R gear without pressing
the accelerator or brake pedal, and
with the EPB released. It maintains a
low speed until reaching a maximum
limit (7 km/h for D gear, 6 km/h for R
gear). The maximum crawling speed
can vary based on terrain and load
etc.
Starting your EV
DRIVING YOUR EV
3
S t a r t i n g y o u r E V
3-43
To Next Page
Loading...
