2
EBD watches and manages how
hard the brakes press on the back
wheels to make driving safer when
you brake. It adjusts the brake
pressure so that the front and back
wheels work together to stop the car
quickly and keep it steady. This is
done by reducing the pressure on the
rear wheels when needed.
the EBD system uses the high-speed
computer to respectively induce and
calculate dierent ground to which
four tires are attached, and thus
calculate dierent friction values at
the moment the vehicle brakes.
Therefore, four tires can be able to
brake in dierent ways and force
based on dierent conditions, and
can be adjusted fast during
movement, so as to ensure that the
vehicle is stable and safe.
Electronic brake force
distribution (EBD) system
Brake system/EBD warning lamp
The brake system warning lamp
illuminates after the ignition switch
is turned on and it goes out several
seconds later (if the park brake has
been released). This indicates that
the warning lamp can work normally.
The brake system/EBD warning lamp
also illuminates when the parking
brake engages and when brake fluid
is less.
The indicator goes out after the park
brake is released. Please do fully
release the park brake before
starting the vehicle.
BRAKE SYSTEM
S a f e t y S y s t e m s
2-31
NOTE
In case of indication
continuously ON. Do not drive
the vehicle in this condition. Get
the vehicle checked. Contact
JSW MG authorised service
center.
!
To Next Page
Loading...
