To control the air to flow out from the
central air outlet and the side air
outlet:
1. Activate the external circulation
mode.
2. Switch the air distribution mode to
face mode ( ) or dual mode ( ).
3. Adjust the temperature to the cool
air area.
4. Adjust the fan speed to the desired
value.
Ventilation
TEMPERATURE CONTROL SYSTEM
The seat cushion and backrest are
provided with ventilating elements.
After the vehicle is set to READY
mode, access the air conditioning
control interface and press the
ventilation switch to control the
ventilating function of the
corresponding seat.
Front seat ventilation*
NOTE
HVAC system is equipped with a
cabin air filter. If the AC
performance is subjectively low, it
is recommended to check cabin
air filter at the nearest JSW MG
Motor dealership. A choked filter
may lead to poor cooling.
!
4
C o m f o r t & C o n v e n i e n c e
4-19
To Next Page
Loading...
