MG Windsor EV - Page 133

1. Cool air
1.1 Normal cooling
1. Turn on the A/C button.
2. Activate the internal circulation
mode.
3. Switch the air distribution mode to
face mode (  ) or dual mode ( ).
4. Adjust the temperature to the cool
air area.
5. Adjust the fan speed to the desired
value.
1.2 Quick cooling
To cool down fast in scorching hot
days or after the vehicle is exposed to
the blazing sun for a long time:
1. Open the windows a little to expel
the hot air inside and fully close
the all windows.
2. Turn on the air conditioning (A/C)
system.
3. Activate the internal circulation
mode.
4 . Switch the air distribution mode to
face mode (  ).
5. Adjust the temperature to the
maximum coolness.
6. Adjust the fan speed to the
maximum.
7. Only use AC max switch.
2. Warm air
2.1 Normal heating
1. Activate the external circulation.
2. Switch the air distribution mode
to foot mode ( ) or dual mode
( ).
3. Adjust the temperature to the
warm air area.
4. Adjust the fan speed to the
desired value.
2.2 No rapid heating mode switch
Activate the rapid heating mode to
increase the passenger area
temperature quickly. It is prohibited
to activate this mode for a long time,
otherwise the inside air quality will
decrease and the windows will fog
up. To clear up the fog on the
windows, turn o the internal
circulation mode so that fresh air
enters inside.
To acquire the warmest air:
1. Activate the internal circulation
mode.
2. Switch the air distribution mode to
foot mode ( ).
3. Adjust the temperature to the
maximum warmness.
4. Adjust the fan speed to the
maximum and switch o AC.
TEMPERATURE CONTROL SYSTEM
Temperature control:
4
C o m f o r t & C o n v e n i e n c e
4-18