4
Exterior
a. Lighting switch
You can set the lighting status in
“Menu - Vehicle settings - Lights -
Headlight setting” to options like
Auto, Low beam, Position lamp and
O.
High beam
To switch on the high beam:
1. Make sure the headlamp is on low
beam.
2. Push the control lever towards the
instrument panel.
3. The high beam indicator will light
up.
4. Push the lever to turn the high
beam on or o.
LIGHTING
CAUTION
When approaching oncoming
vehicles or a vehicle ahead, switch
from high beam to low beam. High
beams can temporarily blind other
drivers, increasing the risk of a
collision.
4-48
OFF: All lights are turned o.
AUTO: Lights turn on automatically.
Position lamp: Interior switch
backlight, position light, and license
plate light are on.
Low beam: Low beam and all the
above lights are on.
The default setting is Auto, which
activates every time the power is
turned on.
C o m f o r t & C o n v e n i e n c e
To Next Page
Loading...
