MG Windsor EV - Page 163

Headlamp flashing
To activate the headlamp high beam
flash:
1. Pull the control lever on the right
side of the steering wheel towards
you.
2. Release the lever after flashing.
The lever will return to its normal
position.
3. Keep the lever pulled to keep the
high beams on.
Hazard warning indicator
Press | to turn on/o the hazard
flasher.
Turn indicator
• Control lever upward: Activates
the left turn signal lamp.
• Control lever downward:
Activates the right turn signal
lamp.
After you complete a turn, the signal
will automatically stop, and the lever
will return to the normal position.
For changing lanes:
1. Pull the lever up or down to the
halfway position (not the full turn
signal position).
2. Release the lever, and it will
return to the normal position
automatically.
4
4-49
LIGHTING
C o m f o r t & C o n v e n i e n c e