2
S a f e t y S y s t e m s
2-38
BRAKE SYSTEM
Automatic vehicle hold (AVH)
After activating the function, the
driver presses the brake pedal to
stop the vehicle, or presses it while
the vehicle is stationary with the
engine idling. When the brake pedal
is released, hydraulic pressure in the
brake system is maintained to keep
the vehicle parked where it is.
There's no need to manually engage
the Electronic Parking Brake (EPB)
for parking in this situation.
a. AVH switch (Auto Hold)
The automatic parking function is set
to the default open state and can be
turned on/o in the car “Menu -
Vehicle settings - Driving - Auto
Hold”.
c. Electronic parking brake (EPB)
w iorking ndicator*
The Electronic parking brake (EPB)
working indicator illuminates as the
electronic parking brake is pulled up.
This indicates that the vehicle is in a
parking state.
This indicator goes out as the
electronic parking brake is released.
This indicates that the vehicle is out
of the parking state.
This indicator keeps illuminated as
long as the electronic parking brake
engages firmly.
NOTE
In case of indication
continuously ON. Do not drive
the vehicle in this condition. Get
the vehicle checked. Contact
JSW MG authorised service
center.
!
To Next Page
Loading...
