2
b. Automatic vehicle hold (AVH)
warning indicator
After the vehicle is powered on, the
AVH warning indicator illuminates
for a few seconds and then goes out.
This indicates normal functioning of
indicator lamp.
This indicator illuminates when the
automatic vehicle hold function
works and the vehicle is being
parked. It goes out as the vehicle
gets out of the parking state.
S a f e t y S y s t e m s
2-39
BRAKE SYSTEM
NOTE
In case of indication
continuously ON. Do not drive
the vehicle in this condition. Get
the vehicle checked. Contact
JSW MG authorised service
center.
!
AVH conditions AVH shall be
activated firstly:
1. The vehicle is stationary and in the
READY state.
2. T he brake pedal is depressed to a
degree (brake hydraulic pressure >
9 bar).
3. Ensure that the driver's seat belt is
buckled and the driver's side door
is closed.
After the vehicle is parked
automatically, if you need to start the
vehicle, gently depress the
accelerator pedal. When the vehicle
reaches the starting condition, the
parking brake will be released
automatically.
To Next Page
Loading...
