the driver's side switch till the
window glass is closed completely,
and continue to pull upward the
switch for at least 5s and release it.
Now the initialization learning is
completed. If the one-button rising
or lowering function is still
unavailable after initialization
learning, it is recommended to drive
to the JSW MG authorised service
center for check and repair.
Window motor thermal
protection*
Window motor thermal protection is
a protection function of preventing
the window regulator motor from
overheating due to long-time use.
The motor will not work or the
working frequency will be reduced to
prevent the motor from being
damaged when the motor reaches
the preset temperature limit. Please
do not continuously and frequently
lift the window.
One-button rising of four-
door power window*
One-button ascending is available in
power window. To close the window,
pull upward the switch to the top
(2nd gear) and release, and the
window will be raised automatically
to the fully-close position. To stop
raising the window, press down the
button and release (short press is
ok).
Anti-pinch function of power
window*
The power window that has the one-
button rising function also has the
anti-pinch function to reduce
pinching injuries. The power window
will be lowered automatically for a
certain distance in case of any
obstruction in its one-button rising
process.
Initialization learning of
power window*
The driver's side window may lose
the one - button rising and lowering
functions in some cases, such as
battery connection after
disconnection. In such cases, the
window initialization learning shall
be conducted first. First, pull upward
4
WINDOWS
C o m f o r t & C o n v e n i e n c e
4-8
To Next Page
Loading...
