Before driving long distances, it's
important to conduct a safety check.
You can also visit a JSW MG
authorised service center for
inspection.
a. Exterior:
• Check tire pressure and inspect
tires for damage.
• Ensure wheel nuts are tightened
securely.
• Confirm headlights and all other
lights are functioning properly.
b. Interior:
• Ensure seat belts fasten securely
and are undamaged.
• Check that maintenance
indicators, instrument lights, and
defroster are working.
• Ensure there's enough space for
the brake pedal to function
properly.
• Inspect battery connectors for
corrosion, looseness, or cracks
in the casing.
c. Under the hood:
• Ensure there are fuses of correct
specifications available.
• Check that refrigerant levels are
normal.
Pre-driving safety check
DRIVING YOUR EV
3
After starting:
• Verify that instrument cluster
indicators and speedometer are
operating normally.
• Ensure the vehicle maintains a
straight path when brakes are
applied.
• Listen for any unusual noises.
Preparations before driving:
• Check surroundings before
entering the vehicle.
• Adjust seat position, backrest
angle, seat cushion height,
headrest height, and steering
wheel angle and height.
• Adjust rearview mirror and side
mirrors.
• Ensure all doors are closed
securely.
• Fasten seat belts.
Gear shift controls:
• Gear positions are marked on
the gearshift lever.
• Press the "P" button to stop the
vehicle; use this position when
starting or stopping the motor.
• Press the brake pedal and the
unlock button to shift gears.
S t a r t i n g y o u r E V
3-37
To Next Page
Loading...
