2
When you open the driver side door
in the motionless state, the vehicle
will automatically apply parking
brake, and you do not have to pull up
the EPB switch.
During transport, traction and
vehicle cleaning, you may need to
deactivate the EPB automatic
clamping function so as to make it
possible to move the vehicle after
exiting READY state.
3. Deactivation method: Depress
the brake pedal and hold the EPB
switch pressed. The EPB light when
go on deactivation.
S a f e t y S y s t e m s
2-37
BRAKE SYSTEM
b. Electronic parking brake (EPB)
fault ndicator*i
The Electronic parking brake (EPB)
fault indicator illuminates when it
has encounter some fault.
NOTE
In case of indication
continuously ON. Do not drive
the vehicle in this condition. Get
the vehicle checked. Contact
JSW MG authorised service
center.
!
To Next Page
Loading...
