MG authorised Service Center
for repair and maintenance of
the airbag system.
WARNING
!
if the airbag cover is damaged,
opened or broken, the airbag may
not function normally. It shall be
repaired as soon as possible.
Never stick or cover any object on
the airbag cover surface or refit the
airbag cover; never try to repair,
adjust or remove or install any
airbag system component; never
try to refit the front bumper of the
vehicle body by yourself.
Other situations where the airbag
may be inflated (deployed) except
for a collision The airbags may also
inflate if the underside of the
vehicle suers a severe impact.
• An airbag is designed to inflate
only once. After the airbag is
inflated, some parts of the
airbag system need to be
replaced. Otherwise, the airbag
system will be unable to provide
protection in the next collision
accident. The airbag system
parts that shall be replaced
include the airbag module,
airbag control module, seat belt
pretensioner and other parts.
• Work related to the SRS can only
be done by JSW MG authorised
Service Center technicians with
corresponding qualification.
Improper repair and
maintenance may cause that
the airbag system cannot
function normally. Please drive
to the JSW MG authorised
Service Center for repair and
maintenance.
• Repair, maintenance and
replacement of airbag system:
• The airbag system must be
maintained by JSW MG
authorised Service Center
technicians. Improper
maintenance will cause the
airbag system to fail to function
normally. Please go to the JSW
SUPPLEMENTARY RESTRAINT SYSTEM (SRS)
2
2-30
To Next Page
Loading...
