Initialization learning of sunroof
sunshade
The sunroof may lose its one-button
opening or closing function in some
cases, such as the replacement of
sunroof glass or motor. In such
cases, the sunroof initialization
learning shall be conducted first. In
the state where the sunroof is
completely closed, set infotainment
cluster settings under “Menu -
Vehicle setting - Maintenance -
Sunshade initialization” and click on
Sunshade Initialization, the
sunshade will shake slightly,
indicating the completion of the
initialization learning process. If the
one button opening or closing
function is still unavailable after
initialization learning, it is
recommended to drive to the JSW
MG authorised service center for
check and repair.
Roof*
When the vehicle is in high-
voltage/READY state, you can
operate the electric sunroof on
infotainment cluster.
Power sunroof sunshade*
Sunroof shade
The panoramic sunshade can be
operated in infotainment cluster
under Door & Window > Sunshade.
1. Press "All Close", the panoramic
sunshade closes, and the degree
of closure is 0%.
2. Press "All Open", the panoramic
sunshade opens, and the degree
of opening is 100%.
3. Slide to adjust: the opening
degree ranges from 0% to 100%.
4
MIRRORS
C o m f o r t & C o n v e n i e n c e
4-5
To Next Page
Loading...
