5. No energy recovery if the ABS MIL
or ESC indicator is on.
In some cases, the energy recovery
indicator might not light up, but
energy recovery could still occur at a
lower power.
Adjustable energy recovery
strength
To adjust the energy recovery
strength:
1. Default setting: Energy recovery
is set to heavy mode by default.
2. Adjusting:
Go to Settings > Vehicle > Driving >
Energy Recovery Mode in the
infotainment system.
Choose from three levels: Light,
Normal and Heavy.
Energy recovery strength
increases gradually from Light to
Heavy.
4-29
NOTE
In case of indication
continuously OFF. Get the
vehicle checked, contact JSW
MG authorised service center.
!
4
INSTRUMENT PANEL
C o m f o r t & C o n v e n i e n c e
To Next Page
Loading...
