MG Windsor EV - Page 170

The wireless charging area is located
in the area shown in the figure. The
charging function is enabled when
the START/STOP Switch is placed in
the ACC/ON/READY positions. Place
the phone face up horizontally in the
charging area, which can be used for
wireless charging.
Ensure that phone is kept properly on
the charging pad. There is possibility
of inadequate charging if the mobile
phone is not resting properly on the
charging pad, in such conditions the
phone should be lifted and placed
back properly.
Do not keep any metal object in the
charging pad along with Mobile
Phone. It will aect phone charging
performance. Also, it may cause
overheating of phone and metal
objects.
Smart phones of some
manufacturers may display charging
indication on weak current and no
increase in net charge. This is due to
the particular characteristic of the
smart phone and does not imply a
malfunction on wireless charging
function.
For certain mobile phones with their
own protection, the wireless charging
speed may decrease sometimes, and
the wireless charging may stop.
When the wireless charging system of
the mobile phone is being used, make
sure that the smart key is 20cm or
more away from the wireless charging
area.
4-56
NOTE
Only one mobile phone can be
charged at a time.
!
4
WIRELESS CHARGER
C o m f o r t & C o n v e n i e n c e