2
c. Seat backrest adjustment
Electric adjustment type*
S a f e t y S y s t e m s
2-6
SEATS AND PROTECTIVE DEVICES
As shown in the figure, turn the
adjustment switch forward and
backward, and the backrest will be
folded forward or unfolded
backward depending on the vehicle
configuration. Release the switch
when it is adjusted to a proper
position.
NOTE
If the backrest does not move
when the switch is turned, the
backrest may be already at its
limit position, or the vehicle
battery runs out. Please check for
confirmation. Never turn the
switch forcibly to avoid any
damage.
!
Manual adjustment type*
Pull up the handle near the seat
cushion; adjust the backrest
inclination angle to a proper
position; then, release the handle.
After adjusting the seat backrest, try
to shake the backrest to ensure that
the backrest is locked.
WARNING
!
The backrest plays an important
protection role when the vehicle is
running. Unlocked backrest may
cause severe personal injuries in
case of sudden braking or a
collision. Any time after adjusting
the seat backrest, shake the
backrest to check whether it is
locked even though no passenger
occupies the seat.
To Next Page
Loading...
