Turn o the ignition switch and all
electrical appliances before
charging.
If the vehicle has been stored for an
extended period of time, and can not
be started due to battery
undercharge (general terminal
voltage ≤ 12V), the battery must be
removed from the vehicle and
charged with ground equipment
(operating in accordance with the
charging device manufacturer’s
instructions).
When charging with a low current
(such as a small charging device),
generally it is not required to remove
the battery connecting cables. But
you must pay attention to the
instructions given by the charging
equipment manufacturer.
Before the quick charge, that is,
before the high current charge, you
must remove two connecting cables.
5
MAINTENANCE
R e p a i r & M a i n t e n a n c e
5-16
NOTE
Please pay attention to the
warnings & instructions for
battery before working on it.
When charging, the power supply
of charging device can be
switched on only after the
charging device electrode chuck
clipped to the battery electrode
as specified. After charging, first
turn o the charging device,
unplug the power cord, and then
remove the electrode chuck of
charging device from the battery.
!
To Next Page
Loading...
