Refilling Brake Fluid
1. Thoroughly wipe o the dirt
around the reservoir filler cap.
2. Open the filler cap.
3. Fill the brake fluid recommended
by MG to the MAX mark of the
fluid reservoir. Be careful not to
spill the fluid on the paint's
surface. In case of spilling on the
paint surface, wash the area with
cold water immediately.
4. Re-install the reservoir filler cap.
NOTE
Before opening the filler cap,
clean the area around the brake
fluid reservoir filler cap.
Contamination of the brake fluid
system will aect the system
performance, resulting in costly
repairs.
!
5
MAINTENANCE
R e p a i r & M a i n t e n a n c e
5-21
CAUTION
The brake fluid is irritating to the
skin and eyes.
Avoid contacting the brake fluid
with the skin or eyes. In case of
contact, wash the part in contact
with the brake fluid with soapy
water or hand sanitizer thoroughly.
The brake fluid spilling over the
front compartment may cause a
fire. An overfull fluid reservoir is
not allowed. Front compartment
fire may cause personal injury and
damage to the vehicle and other
properties.
It is prohibited to dispose of the
old brake fluid as household
garbage.
Be sure to use the local legal
waste management agencies.
The old brake fluid and container
are dangerous, and may be
harmful to health and the
To Next Page
Loading...
