CAUTION
The gas in the halogen bulb is
under pressure. Handle with care
and properly dispose of the
halogen bulb.
• Wear safety glasses when
removing or installing the bulb.
• Take care to prevent bulbs from
wear and scratches.
• When the bulb lights up
without being packaged,
prevent it from contacting
liquids.
• Light up the lamp for test after
the bulb being installed.
• Replace the cracked or
damaged headlamp in time.
• Do not touch the glass portion
with ungloved fingers when
replacing the halogen bulb.
• Keep the bulb out of reach of
children.
• Dispose of the old bulb
carefully to prevent personal
injury due to bulb explosion.
Lamp bulb replacement
5
MAINTENANCE
R e p a i r & M a i n t e n a n c e
5-26
CAUTION
Clean the halogen bulb with
alcohol or mineral spirits and non-
woven fabrics. Do not touch the
bulb with hands directly.
Fingerprints may significantly
shorten the eective service life of
the halogen bulb.
Professional skills and special
equipment are required for lamp
bulb replacement. It is
recommended that you have this
done at the JSW MG authorised
service center. Otherwise, it may
cause personal injury or damage
to the vehicle.
To Next Page
Loading...
