MG Windsor EV - Page 221

TECHNICAL DATA
Other parameters
Item
Parameter
Requirements for dynamic unbalance of
wheel and tire assembly
Maximum Dynamic Imbalance amount
is not greater than 30g
Reasonable range of brake pedal free
travel
Measure that the pedal stroke is less
than 2.57 mm when 0.2 bar hydraulic
pressure is generated in the master
cylinder.
Minimum scrapping thickness of front
brake disc
24mm
Minimum thickness for discarding the
rear brake disc (front disc and rear disc)
8mm
Minimum thickness for discarding the
rear brake pad (front disc and rear disc)
Front 2.5mm, Rear 2mm
5
R e p a i r & M a i n t e n a n c e
5-43