MG Windsor EV - Page 233

NEW VEHICLE WARRANTY
3.3.2 This guarantee covers
the repair or replacement of
components with perforated
steel panel work due to a
manufacturing, material or
protective product application
defect, acknowledged by the
Manufacturer.
3.3.3 It is authorized JSW MG
MOTOR workshop's discretion
to decide whether it is
appropriate to repair or
replace these components,
and to inform the Customer.
3.4 The JSW MG MOTOR Anti-
Corrosion Warranty does not
cover:
3.4.1 any damage which is not
covered by the JSW MG
MOTOR New Vehicle Warranty,
as defined at the start of this
booklet; Mechanical
components which are not an
integral part of the bodywork
or sub-frame (wheel rims,
exhaust system, etc.).
3.4.2 In case, repairs
(including denting or painting)
have been carried out on the
body of the JSW MG MOTOR
Vehicle in a workshop outside
the JSW MG MOTOR
authorized network.
3.5 Anti-Corrosion Warranty
conditions of application
3.5.1 To obtain the Anti-
Corrosion Warranty, the
Customer must contact any
Workshop of the JSW MG
MOTOR Authorized Workshop
Network - only such Workshop
have authorization for
operations of this sort.
3.5.2 The Customer shall show
the duly completed (delivery
date and validation of anti-
corrosion test coupons) the
Owner's Manual as proof of
their warranty entitlement.
3.5.3 Application of the JSW
MG MOTOR Anti-Corrosion
Warranty is subject to the anti-
corrosion tests on the
bodywork and sub-frame.
Customer shall ensure that
these tests are conducted at
the mileage intervals stated in
the Owner's Manual, and at
least once every two years.
Scheduled maintenance
services in the JSW MG
MOTOR authorized workshop
network incorporate these
tests.
5
R e p a i r & M a i n t e n a n c e
5-55