2
If the user disables the ESC,
some ESC functions will be
disabled, and the ESC OFF lamp
will illuminate. If ESC is working
when it is to be disabled, the ESC
function will not be disabled
immediately and will be disabled
after the work is over. If the user
enables the ESC again, all
functions will be restored.
4) Each time the vehicle is started,
the ESC system will be activated
automatically.
After you start the vehicle, the light
on the indicator will turn on for a
short time and then turn o. This
shows that the indicator is working
correctly. While you are driving, if the
ESC turns on, its light will blink to let
you know the system is active. But if
the ESC light stays on without
blinking, it means there is a problem
with the system.
S a f e t y S y s t e m s
2-34
BRAKE SYSTEM
NOTE
In case of indication
continuously ON. Do not drive
the vehicle in this condition. Get
the vehicle checked. Contact
JSW MG authorised service
center.
!
Electronic stability control (ESC)
On/O
NOTE
Normally, it is not recommended
to disable the ESC system.
!
To Next Page
Loading...
