SLIMLINE touch (EN)_allgem. Vers.01 (02-2022→) Translation of the original Page 28-47
5.7 TROUBLESHOOTING
Provided that the regulations and information contained in the operating manual are complied
with, the MHS SLIMLINE Bread Cutter normally operates without any errors.
In case of faults, we recommend checking the following points first before contacting the service
department:
5.7.1 Door/flap open message
• Call-up of the info menu as described in chapter 5.6.
After the submenu is called up, the flap or door to be closed is shown on the top display.
Once the door or flap in question is closed, the machine returns to cutting mode.
To Next Page