SLIMLINE touch (EN)_allgem. Vers.01 (02-2022→) Translation of the original Page 4-47
1 General instructions
Dear Customer,
this operating and maintenance manual will help you become familiar with the MHS SLIMLINE
bread cutting machine and benefit from its intended applications. The Operating and
Maintenance Manual contains important information required to use the device safely, properly
and economically. Observing this information helps to avoid risks, repair costs and downtime,
as well as increasing the reliability and operational lifetime of the machine.
Before activation, the conditions for maintaining safety described in chapter 2 of the operating
manual must always be fulfilled.
Cleaning and care work may only be undertaken by trained personnel.
Trained personnel are considered to be employees who have, for example, used this Operating
Manual to make themselves familiar with the machine or who have been trained by a trained
member of staff. The operator of the equipment is responsible for ensuring that this process is
documented.
Maintenance work must be completed at regular intervals by service technicians qualified by
MHS, otherwise we will not be able to fulfil our guarantee obligations as per our delivery
conditions.
We wish to stress that we are not liable for any damage or operational disruptions resulting from
failure to observe information contained in the Operating and Maintenance Manual, the use of
non-approved spare parts or improper use of the equipment.
Please contact us either directly or via our customer service department should you have
questions not covered by this Operating and Maintenance Manual or if you have suggestions
which could improve this Operating and Maintenance Manual.
MHS Schneidetechnik GmbH
Im Deboldsacker 6
D-74232 Abstatt, Germany
Telephone: +49 (0) 70 62 97 89 6 - 0
Telefax: +49 (0) 70 62 / 97 89 6 - 29
e-mail: info@mhs-schneidetechnik.de
Internet: www.mhs-schneidetechnik.de
To Next Page
Loading...