MHS Boilers SLIMLINE touch - Page 3

SLIMLINE touch (EN)_allgem. Vers.01 (02-2022→) Translation of the original Page 3-47
EC Declaration of Conformity
In accordance with Machinery Directive 2006/42/EC, Annex IIA
1. Equipment manufacturer MHS SCHNEIDETECHNIK GMBH
Im Deboldsacker 6
D- 74232 Abstatt, Germany
2. Device decription: Designation: CIRCULAR KNIFE
BREAD CUTTING MACHINE
TYPE: MHS SLIMLINE touch
We hereby declare that the CIRCULAR KNIFE BREAD CUTTING MACHINE of TYPE MHS SLIMLINE
corresponds with the following authoritative specifications, which were applicable at the date of issue
indicated below:
EC Directives observed
- EC - Machinery Directive 2006/42/EC
- EC - Directive "Electromagnetic Compatibility" 2014/30/EU
- EC - Low Voltage Directive 2014/35/EC
Applied harmonised European standards
- EN ISO 12100 (Safety of machinery -- General principles for design -- Risk assessment and risk
reduction)
- EN ISO 13857 (Safety of machinery - Safety distances)
- EN ISO 14120 (Safety of machinery - Guards)
- EN ISO 14119 (Safety of machinery - Interlocking devices associated with guards). guards
- EN 1672-2 (Food processing machinery - Basic concepts - Part 2: Hygiene requirements)
- EN 61000-6-1+3 (Household EMC)
- EN 60204-1 (Electrical equipment)
- EN 13954 (Bread slicers)
Other standards and directives
- Ordinance 1935/2004
- Ordinance 2023/2006
- Ordinance 10/2011
Authorised representative for the creation of documentation
- Christoph Stöcker, Im Deboldsacker 6, D-74232 Abstatt, Germany
The machines of the type SLIMLINE may only be used for cutting foods such as bread. Other applications
are explicitly prohibited.
This declaration shall be void in the event that modifications are undertaken without prior agreement with
MHS.
Issuing representative: Christoph Stöcker
place, date: Abstatt, Germany, dated 09/02/2022
Signed: ______________________