SLIMLINE touch (EN)_allgem. Vers.01 (02-2022→) Translation of the original Page 5-47
1.1 PROPER USE
The SLIMLINE (touch) may be used exclusively for cutting fresh bread. Using it to slice other
bakery products (e.g. cake, Danish pastries, etc.), dried or spoiled bread as well as any non-
bakery products is strictly prohibited. Using the machine for slicing bread containing raisins or
fruit will lead to increased cleaning requirements due to the high proportion of fat and sugar
contained in such products. This can lead to the machine failing in case of deficient cleaning /
maintenance.
Cutting hot bread (temperatures >60°C) is not permitted. Bread to be cut must have at least one
flat support side, the edges of which have a radius no greater than 2cm. At the ends, the bread
must have a minimum height of 3 cm, so that at least 2 gripper claws can reach the bread.
Otherwise it is not possible to guarantee the automatic gripping of the bread.
A prerequisite for good cutting results and a fault-free process is that the bread be placed in the
machine by the customer with the intended orientation and with the flat side down.
ATTENTION!
This machine is designed to be used by the end customer for inserting
and slicing bread. Cleaning and care work may only be undertaken by
trained personnel. Maintenance work must be completed by trained
technical personnel.
Use in bakeries, supermarkets or discount stores by the end customer
is only permissible if trained staff are present in the store. However,
there is no obligation to provide continuous supervision.
The safety and operating instructions attached by the manufacturer may
not be covered up or hidden by other labels.
1.2 GUARANTEE INFORMATION
The guarantee is valid for a period of 24 months after installation of the machine and covers the
mechanical and electrical components. The following wearing parts are not subject to the
guarantee: Blade, guide ring, and sliding bearing.
Unauthorised modifications or improper use of the machine/unit by the operator shall void the
guarantee.
Compliance with the points set out in Point 1.1 and the execution of annual maintenance
subject to a fee by certified MHS customer service personnel are preconditions for the
recognition of any guarantee claims.
Damage that occurs due to external force being applied, a defective mains supply, incorrect
operation and use (e.g. deficient cleaning, cutting foreign bodies such as other foods, drink
bottles, etc.) and any consequential damage that arises as a result of this is also excluded from
the warranty / guarantee. Furthermore, waiting periods during the performance of warranty or
guarantee services are not included in the warranty and guarantee cover.
To Next Page
Loading...