2.2 Sensor Models
Model Model codes Measuring range Spectral response Typical applications
CT CT-SF02 / CT-SF15 /
CT-SF22
-50 to 975 °C 8 - 14 μm Non-metallic surfaces
CTF CTF-SF15 /
CTF-SF25
-50 to 975 °C 8 - 14 μm Fast processes
CTH CTH-SF02 /
CTH-SF10
-40 to 975 °C 8 - 14 μm High ambient tempera-
tures (to 250 °C)
CTM-1SF CTM-1SF40 /
CTM-1SF75 /
CTM-1SF75H1
485 to 2200 °C 1 μm Metals and ceramic sur-
faces
CTM-2SF CTM-2SF40 /
CTM-2SF75
CTM-2SF75H1
250 to 2200 °C 1.6 μm Metals and ceramic sur-
faces
CTM-3SF CTM-3SF22 /
CTM-3SF33 /
CTM-3SF75H1 /
CTM-3SF75H2 /
CTM-3SF75H3
50 to 1800 °C 2.3 μm Metals at low object tem-
peratures (from 50 °C)
CTP CTP 0 to 710 °C 7.9 μm Temperature of thin film
plastics
In the following chapters of this manual you will find only the short model codes. On the CTM-1, CTM-2 and
CTM-3 models the whole measuring range is split into several sub ranges.
To Next Page
Loading...
