1.4 Proper Use
- The thermoMETER CT is designed for use in industrial and laboratory areas. It is used for non-contact
temperature measurement.
- The system may only be operated within the limits specified in the technical data, see Chap. 2..
- Use the system in such a way that in case of malfunctions or failure personnel or machinery are not endan-
gered.
- Take additional precautions for safety and damage prevention for safety-related applications.
1.5 Proper Environment
- Protection class:
Sensor: IP 65 (NEMA 4)
Controller: IP 65 (NEMA 4)
- Operating temperature:
Sensor: See also Chapter Measurement Specification, see Chap. 2.5
Controller: 0 ... 85 °C (+32 ... +185 °F)
Avoid abrupt changes of the operating temperature of both the sensor and the controller.
> Inaccurate measuring values
- Storage temperature:
Sensor: See also Chapter Measurement Specification, see Chap. 2.5
Controller: -40 ... 85 °C (-40 ... +185 °F)
- Humidity: 10 ... 95 %, non-condensing
- EMC acc. to: EN 61326-1: 2006
EN 61326-2-3: 2006
To Next Page
Loading...
