6.3.4 Laser Sighting Tool
The laser sighting tool [TM-LST-CT], battery powered (2x Alkaline AA), for alignment of CT sensors. The laser
head has similar mechanical dimensions as the CT sensor.
Fig. 20 Laser sighting tool [TM-LST-CT]
Fig. 21 Laser label
During operation the pertinent regulations acc. to DIN EN 60825-1: 2007 on “radiation safety of laser equip-
ment” must be fully observed at all times.
Do not point the laser
directly at the eyes of
persons or animals! Do
not stare into the laser
beam. Avoid indirect
exposure via reflective
surfaces!
Never deliberately look
into the laser beam!
Consciously close
your eyes or turn away
immediately if the laser
beam should hit your
eyes.
To Next Page
Loading...
