1. Safety
The handling of the system assumes knowledge of the instruction manual.
1.1 Symbols Used
The following symbols are used in the instruction manual.
Indicates a hazardous situation which, if not avoided, may result in minor or moder-
ate injuries.
Indicates a situation which, if not avoided, may lead to property damage
Indicates a user action.
i
Indicates a user tip.
Measure
Indicates a hardware or a button/menu in the software
1.2 Warnings
Connect the power supply and the display/output device in accordance with the safety regulations for electri-
cal equipment.
> Danger of injury
> Damage to or destruction of the sensor and/or controller
Avoid shock and vibration to the sensor and the controller.
> Damage to or destruction of the sensor and/or controller
The power supply must not exceed the specified limits.
> Damage to or destruction of the sensor and/or controller
Protect the sensor cable against damage.
> Destruction of the sensor, Failure of the measuring device
To Next Page
Loading...
