Micro Motion CDM100P - Communications Tools and Protocols

Model codes and device types (continued)Table 1-1:
Model code Device nickname I/O
Electronics mount-
ing
CDM100M****B CDM TPS • One mA output
• One Time Period Sig-
nal output
• RS-485 terminals
Integral
CDM100M****A CDM FF • Foundation fieldbus 4-wire remote
transmitter
Restriction
The CDM mA, CDM DO, and CDM FF meters support a complete set of application and configuration
options. The CDM TPS meter supports a subset of configuration options. Refer to the product data
sheet for details.
1.3 Communications tools and protocols
You can use several different communications tools and protocols to interface with the
device. You may use different tools in different locations or for different tasks.
Communications tools, protocols, and related informationTable 1-2:
Communica-
tions tool Supported protocols Scope In this manual For more information
Display Not applicable Basic configuration and
commissioning
Complete user informa-
tion. See Appendix B.
Not applicable
ProLink III • Modbus/RS-485
• HART/Bell 202
• Service port
Complete configuration
and commissioning
Basic user information.
See Appendix C.
User manual
• Installed with soft-
ware
• On Micro Motion
user documentation
CD
• On Micro Motion
web site
(www.micromo‐
tion.com)
Field Commu-
nicator
• HART/Bell 202 Complete configuration
and commissioning
Basic user information.
See Appendix D.
User manual on
Micro Motion web site
(www.micromo‐
tion.com )
Before you begin
4 Micro Motion
®
Compact Density Meters (CDM)