38
IP Commands
Commands at IP level:
IP Configuration
IP Setup [<ipaddress> [<ipmask> [<ipgateway>]]] [<vid>]
IP Web management [enable|disable]
IP Configuration
Description:
Show IP configured IP address, mask, gateway, VLAN ID and mode.
IP Setup`
Description:
Setup or show IP configuration.
[<ipaddress>]: IP address. (default: Show IP configuration)
[<ipmask>] : IP subnet mask (default: Subnet mask for address class).
[<ipgateway>]: Default IP gateway, (default: 0.0.0.0).
[<vid>] : VLAN ID, 1-4094 (default: 1).
IP Web management
Description:
Activate or deactivate the IP configuration.
[enable|disable]: Enable/disable IP (default: Show IP mode).
SNMP Commands
Commands at SNMP level:
SNMP Configuration
SNMP Community [<get>|<set>] [<community>]
SNMP Setup [enable|disable]
SNMP Trap [<IP Address>]
SNMP Configuration
Description:
Show the SNMP configuration.
SNMP Community [<get>|<set>] [<community>]
Description:
Set or show community setting for SNMP
[<get>|<set>]: Community for get or set
[community]: community string
To Next Page
Loading...
