MicroNet SP676C - Page 40

Ratelimit Egress
Description:
Set or show the shaper configuration.
[<portlist>] : Port list (default: All ports).
[enable|disable] : Enable or disable shaper.
[<rate>] : Disable or set leaky bucket rate in Kbit/s [0-3968k]
(default: Show shaper rate).
Ratelimit Ingress
Description:
Set or show the policer configuration.
[<portlist>] : Port list (default: All ports).
[enable|disable] : Enable or disable policer.
[<rate>] : Disable or set leaky bucket rate in Kbit/s [0-3968k]
(default: Show policer rate).
2005/09/27
40
61NB-G8290+200.C