2. Select the VLAN ID of the VLAN you want in the VLAN Configuration List,
then click “Delete” / “Refresh” to clear/refresh this VLAN group.
Note:
1. When a port is configured to a specific VLAN group, a PVID that
corresponding to the VLAN id will be assigned automatically to this port.
(Ex, when you make port 3 of a VLAN with VLAN id “2”, the PVID “ 2 ” will
be assigned automatically to port 3)
2. Settings in VLAN, Port aggregation, and Mirror are correlative. Please
make sure that the setting won’t influence each other.
To Next Page
Loading...
