H/W Version: 1.0
MAC address: 00-08-54-00-00-31
SNMP: enabled
Trap IP: 0.0.0.0
Readcommunity: public
Writecommunity: private
Trapcommunity: public
You can type “up” and press <enter> to go back to upper level.
Command Description
The following session introduces the command structure of the command line
interface.
Command groups:
System - System commands
Console - Console commands
Port - Port commands
MAC - MAC commands
VLAN - VLAN commands
Aggr - Aggregation commands
LACP - IEEE 802.3ad Link Aggregation commands
RSTP - IEEE 802.1w Rapid Spanning Tree commands
User Group - User Group commands
QoS - QoS commands
Mirror - Mirror commands
IP - IP commands
Dot1x - Dot1x commands
IGMP - IGMP Snooping commands
Debug - Debug commands
System Commands
System Configuration [all]
System Restore Default [keepIP]
System Name [<name>]
System Reboot
System SNMP [enable|disable]
System Trap [<IP Address>]
System Readcommunity [<community string>]
System Writecommunity [<community string>]
System Trapcommunity [<community string>]
System Power Saving [full|up|down|disable]
System Configuration [all]
To Next Page
Loading...
