MicroNet SP684C User Manual

Dot1x Commands
Commands at Dot1x level:
Dot1x Configuration
Dot1x Mode [enable|disable]
Dot1x State [<portlist>] [Auto|ForceAuthorized|ForceUnauthorized]
Dot1x Server [<IP Address>]
Dot1x UDP Port [<value>]
Dot1x Secret [<Shared Secret>]
Dot1x Statistics [<portlist>]
Dot1x Reauthenticate [<portlist>] [now]
Dot1x Parameters [<parameter>] [<value>]
Dot1x Configuration
Description:
Show current 802.1X configuration.
Dot1x Mode [enable|disable]
Description:
Enable or disable 802.1X process for the switch.
[enable|disable]: new mode (default: Show current configuration).
Dot1x State [<portlist>] [Auto|ForceAuthorized|ForceUnauthorized]
Description:
Set or show the 802.1X state for the port.
[<portlist>] : Port list (default: All ports).
[Auto|ForceAuthorized|ForceUnauthorized]: Set 802.1X state for the ports.
(default: Show mode).
Dot1x Server [<IP Address>]
Description:
Set or show RADIUS server IP address.
[<IP Address>]: IP address of external RADIUS server.
(default: Show current configuration)
Dot1x UDP Port [<value>]
Description:
Set up UDP Port for the external RADIUS server.
www.micronet.com.tw
Page 71 of 74

MicroNet SP684C Specifications

General

Brand	MicroNet
Model	SP684C
Category	Switch
Language	English