the switch, press the button once.
To restore factory default settings, press and hold the button for three seconds.
The Rear Panel
The rear panel of the switch:
Power Receptacle
To be compatible with the electric service standards around the world, the switch is
designed to afford the power supply in the range from 100 to 240 VAC, 50/60 Hz.
Please make sure that your outlet standard to be within this range.
To power on the switch, please plug the female end of the power cord firmly into the
receptacle of the switch and the other end into an electric service outlet. After the
power cord installation, please check if the power LED is lit for a normal power status.
To Next Page
Loading...
