Storm Control
This “storm Control” page allows users to configure the rules for Storm Control. The
allowed frame rates for ICMP frames, learn frames, multicasts, broadcasts and
flooded unicasts are controlled using a central storm controller.
Rate: Allowed values are 1k, 2k, 4k, 8k, 16k, 32k, 64k, or No limit.
To perform storm control:
1. Click on each drop list to specify a speed for each frame type.
2. Click the “Apply” button to execute your configuration.
Statistics Overview
The Statistics Overview is provided for users to see the general transmitting and
receiving status of each port. You may click the “Clear” button to clean all statistics or
click the “Refresh” button to renew the statistics.
To Next Page
Loading...
Need help?
General
