RSTP Commands
Commands at RSTP level:
RSTP Configuration [<portlist>]
RSTP sysprio [<sysprio>]
RSTP hellotime [<secs>]
RSTP maxage [<hops>]
RSTP fwddelay [<secs>]
RSTP version [normal|compat]
RSTP Mode [<portlist>] [enable|disable]
RSTP Aggr [enable|disable]
RSTP Edge [<portlist>] [enable|disable]
RSTP Pathcost [<portlist>] [<pathcost>|auto]
RSTP mcheck <portlist>
RSTP Status
RSTP Statistics
RSTP Configuration [<portlist>]
Description:
Show RSTP configuration.
[<portlist>]: Port list (Default: All ports).
RSTP sysprio [<sysprio>]
Description:
Set or show the RSTP System Priority.
[<sysprio>]: Number between 0 - 61440 in increments of 4096
This provides for 16 distinct values: 0, 4096, 8192, 12288, 16384, 20480, 24576,
28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344 and 61440.
RSTP hellotime [<secs>]
Description:
Set or show the RSTP System Hello time.
[<secs>]: Number between 1 - 10 (default is 2)
RSTP maxage [<hops>]
To Next Page
Loading...
