MicroNet SP684C - LACP Commands

LACP Commands
Commands at LACP level:
LACP Configuration [<portlist>]
LACP Mode [<portlist>] [enable|disable]
LACP Key [<portlist>] [<key>|auto]
LACP Status
LACP Statistics
LACP Configuration [<portlist>]
Description:
Show LACP configuration.
[<portlist>]: Port list (Default: All ports).
LACP Mode [<portlist>] [enable|disable]
Description:
Enable or disable the LACP protocol on ports <portlist>.
[<portlist>]: Port list (Default: All ports).
[enable|disable]: Enable or disable.
LACP Key [<portlist>] [<key>|auto]
Description:
Set the LACP key on ports <portlist>.
[<portlist>]: Port list (Default: All ports).
[<key>]: Number between 1 - 255. Auto means auto generated key
LACP Status
Description:
Show LACP group and port states.
LACP Statistics
Description:
Show LACP protocol port statistics.
www.micronet.com.tw
Page 60 of 74