D5CUB System Board Manual
14. Verify that the amounts of memory shown in the
Standard CMOS Setup screen correctly reflect the
amount of RAM installed in your system.
15. Press <ESC> to return to the main setup menu.
16. Use the arrow keys to move the highlight to any of
the other setup options in the main menu that
contain settings you want to review or change (for
information on the various setup options in the main
menu, see Chapter 4). When you are finished, press
<F10> to select Save & Exit Setup. You are now
finished with the BIOS configuration.
17. If you are using the sound option, install the sound
controller device drivers.
18. If you have installed a CD-ROM drive, install its
device drivers.
Section 1: Quick Installation
11
To Next Page
Loading...
Need help?
General